|
- Fig. 1 Inside of boot lid: Access to manual release
- Fig. 2 -Applies to: Saloon-Rear seat bench: Bowden cable for manual release
The boot lid can be released manually from the luggage compartment or from the rear seat bench.
On vehicles with folding backrest
Prise off the cover using a screwdriver or the emergency key Fig. 1. For instructions on how to remove the key refer to ►Link.
Press the release lever in the direction of the arrow to unlock the boot lid.
On vehicles with fixed backrest
Carefully pull the left side of the rear seat bench out of its mounting until you can grasp hold of the Bowden cable Fig. 2.
Remove the adhesive tape -B-.
Pull the loop -A- until the boot lid is released.
Stick the Bowden cable back on and press the seat bench back into its mounting.
WARNING!
After the boot lid has been released manually on vehicles with fixed backrest, ensure that the bowed wire retainer under the rear seat bench Fig. 2 engages securely in the mounting when reattaching the rear seat.