|
- Fig. 1 Rear side of left headlight: Removing cap
- Fig. 2 Neck piece of reflector: Taking out connector with bulb
Applies to Audi A6s: with xenon headlights
Turn the cap anti-clockwise and remove it Fig. 1.
Turn the connector with the bulb to release it from its seat, and remove the bulb from the neck piece on the reflector Fig. 2.
Pull the defective bulb out of the connector.
Press the new bulb into the connector, paying attention to the positions of the locating lugs on the bulb and the connector.
Fit the connector with the new bulb into the neck piece on the reflector. The arrow-shaped locating lug on the connector must point downwards.
Turn the connector with the bulb clockwise until you feel it engage.
Turn the cap clockwise onto the headlight housing.
Check whether the new bulb is working.