|
Audi A6s with towline anchorage
Audi A6s which do not have a factory-fitted towing bracket* have a connection for a towline anchorage on the right side of the rear bumper.
Take the towline anchorage out of the Audi A6's tool kit ►Link.
Firmly press the lower part of the cap inwards Fig. 1. The cover cap will be released from the bumper.
Screw the towline anchorage into the screw connection as far as it will go Fig. 2 and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
Audi A6s with towing bracket*
Swivel out the towing bracket ►Link.
Attach the tow-bar or the tow-rope to the towing bracket.
Audi A6s which have a factory-fitted towing bracket* do not have a screw connection at the rear for the towline anchorage.
On some models, the shape of the cap can vary.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!
Caution!
To avoid damaging the towing bracket*, only use tow-bars with suitable attachments. If a tow-bar is not available, a tow-rope may be used.