|
- Fig. 1 Canister with hose
Applies to Audi A6s: with selective catalytic reduction
Screw the end of the hose -1- clockwise onto the opening on the canister -A-.
Remove the cap -2- from the other end of the hose -B-.
Fit the end of the hose -2- onto the filler neck on the Audi A6 and turn clockwise as far as the stop to secure.
Lift the canister and then tilt it. Keep it tilted until empty or until no more fluid runs into the tank.
Remove the canister and screw the tank cap back on ►Link.
Caution!
Use only refill canisters of the correct type approved for your Audi A6. AdBlue may leak out if you use another system.
Note
- Your qualified workshop can tell you which refill canisters are approved for your Audi A6.
- A refill canister contains about 5 litres of AdBlue.