|
- Fig. 1 Behind the rear backrest: Hooking the load guard into place
- Fig. 2 Behind the rear backrest: Removing the load guard
Applies to Audi A6s: with load guard
The load guard prevents objects in the luggage compartment from being thrown forward into the passenger compartment.
Hooking into place
Pull the load guard upwards. Engage the ends of the rod in the retainers above the backrest Fig. 1 -arrows-.
Removing
Fold down the backrests ►Link.
Press the button Fig. 2 on either side and lift out the load guard.
Installing
Fold down the backrests ►Link.
Slide the load guard into the mountings on the left and right.
Push the load guard downwards at an angle until it engages on both sides and the red markings on the buttons are no longer visible.
Caution!
To prevent any damage, let the load guard retract slowly.