- Fig. 1 The retaining clip for the bulb carrier has a guide pin
Applies to vehicles: with halogen rear lights
The bulb carrier is easy to install.
Insert the bulb carrier into the rear light. Make sure you hear the retaining tab -A- Fig. 1 click into place.
Position the retaining clip -B- so that the guide pins -C- are located in the recess on the retaining clip, and tighten the nut -D-.
Fit the cover back in the interior trim so that it engages.
Put the screwdriver back into the tool kit.
Make sure that all bulbs for the rear lights are working.