Instruction book Audi A5 Cabriolet Year 2014
Engine Oil 1L Longlife - Audi Fleecejacke - Audi Mug Audi Beanie - Audi all-weather floor mats Genuine Audi Interior Cargo Organizer
 Audi A5 Cabriolet   Controls   Audi adaptive cruise control and braking guard  Audi adaptive cruise control
Applies to vehicles: with Audi adaptive cruise control
You can set any speed between 30 and 200 km/h1).
Indicator lamps and messages in the instrument cluster display will provide you with information about the current driving situation and settings.
Switching on the adaptive cruise control
Pull the lever towards you to position -1- Fig. 1. ACC: standby will appear on the display.
Setting the speed and activating the cruise control
To set the current speed as the cruising speed, press the SET button on the control lever Fig. 1. The speed setting is indicated by the LEDs -A- in the speedometer and is also shown briefly in the system status indicator -D- Fig. 2.
Switching off the adaptive cruise control
Push the lever away from you to position -0- until it engages. The message ACC: off will appear.
-B- Warning and indicator lamps
- No vehicle in front: The adaptive cruise control is switched on. No vehicle has been detected in front. A constant cruising speed is being maintained.
- Vehicle in front: A vehicle in front has been detected. The adaptive cruise control regulates the speed to maintain a constant distance to the vehicle in front, and accelerates and brakes the vehicle automatically.
- Driver intervention prompt: The adaptive cruise control alone is not able to brake the vehicle sufficiently to maintain a safe distance to the vehicle in front. You must intervene Link.
-C- Graphical display in instrument cluster
If the adaptive cruise control is not shown on the display, you can call up the display using the RESET button Link.
The graphical display will show you whether the system has detected a vehicle in front and how far the distance is.
Vehicle outlined - No vehicle has been detected in front.
Vehicle in white - A vehicle has been detected in front.
Vehicle in red - Driver intervention prompt Link.
The two arrows on the scale -C- indicate the distance to the vehicle in front. No arrows are displayed if there is no vehicle in front. If a vehicle is detected in front, the arrows will be on the scale.
The green area of the scale represents the distance setting (for information on how to change the distance setting, refer to Link). When the actual distance is shorter (or is likely to become shorter) than the distance selected, the arrows move into the red area of the scale.
WARNING!
If you press the SET button at a speed of less than 30 km/h, the vehicle will automatically accelerate up to the minimum speed setting of 30 km/h.
Note
  • The speed setting is cleared for safety reasons when you switch off the ignition or the adaptive cruise control system.
  • The electronic stabilisation control (ESC) and traction control system (ASR) are automatically activated when the adaptive cruise control is switched on.
1) Between 30 and 150 km/h in some countries.
Engine Oil 1L Longlife - Audi Fleecejacke - Audi Mug Audi Beanie - Audi all-weather floor mats Genuine Audi Interior Cargo Organizer

All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information. To contact the author of this website click here.