|
Applies to: vehicles with xenon headlights
Removing
Turn the plastic connector with the bulb anti-clockwise so that it is released from its seat
fig. 336►.
Remove the connector from the headlight housing with the bulb.
Pull the defective bulb out of the connector ►.
Installing
Insert the new bulb into the connector so that it is securely seated ►.
Guide the connector with the bulb into the housing and turn it clockwise as far as the stop.
Put the cover back on.
Check whether the new bulb is working.
Note
To make it easier to change the turn signal bulb, we recommend that you remove the all-weather light first.