|
Applies to: vehicles with Audi active lane assist
The active lane assist (lane departure warning feature) uses a camera in the windscreen to detect lane markings (subject to general system limitations). If you approach one of the detected lane markings, the system corrects the steering to warn you that the vehicle might be about to cross one of the markings. You can override this steering input at any time. The steering wheel vibrates slightly if you cross a lane marking. The vibration warning must be activated beforehand on the infotainment system. The active lane assist is functional when it detects a demarcation line on at least one side of the lane in which you are driving.
As the system is designed for driving on motorways and other major roads, it is only active above a speed of about 65 km/h (may vary in different export markets).
(Applies to vehicles with side assist) : If you operate the turn signals while the active lane assist and side assist are active, the steering will be corrected just before you cross the lane demarcation if the side assist detects vehicles approaching quickly or travelling at about the same speed as your own vehicle and judges the situation to be critical. This intervention is intended to keep the vehicle in the lane.
(Applies to vehicles without side assist) : The system does not warn you if you operate the turn signal before crossing a lane demarcation. In this case, it assumes that you intend to change lanes.
(Applies to vehicles with adaptive cruise control:) The system does not warn the driver or intervene in the steering if it detects a situation where it is clear that an overtaking manoeuvre is intended. The traffic jam assist is activated at speeds below approximately 65 km/h (in some countries) when the corresponding conditions have been met link►.
- The system initiates a corrective steering input to warn the driver that the vehicle is about to leave the lane. As the driver you are always responsible for staying in your own lane.
- The system can assist you to keep the vehicle in the lane, however it is not capable of driving on its own. Never take your hands off the steering wheel.
- In certain situations, e.g. during heavy braking, the system may not correct the steering.
- In certain circumstances, not all of the lane markings may be detected by the camera. A corrective steering input can only be initiated if the system detects a lane marking on the side in question.
- Variations in the road surface or objects on the road may be misinterpreted as lane markings. In this case, the steering may be corrected unexpectedly or not at all.
- The camera s view might be obstructed, for example by vehicles travelling in front, rain, snow, a lot of water on the road or adverse light. If this happens, the active lane assist may not detect the lane markings or may respond incorrectly.
- In certain circumstances, for instance if visibility is poor, the setting for the steering input may be switched from “early” to “late” 1).
- In certain driving conditions, such as ruts in the road surface, heavy road cambers or side winds, the assistance provided by the steering correction may be insufficient to keep the vehicle in the middle of the lane.
- For safety reasons, the active lane assist must not be used in poor weather or in difficult or slippery road conditions (such as ice, fog, loose grit or gravel, heavy rain, snow, etc.) - risk of accident!