The settings for the graphic display* and acoustic signals are controlled via the infotainment system.
Select: Function selector button CAR > Parking aid. Or:
Select: Function selector button CAR > control button Car systems* > Driver assist > Parking system.
Display*
- off - The parking aid gives only acoustic warning signals when it is activated.
- on - The graphic display or the reversing camera image* will be displayed when the parking aid is activated.
Warning beeps
- Rear volume - Volume of the rear sensors
- Rear frequency - Frequency of the rear sensors
- Front volume* - Volume of the front sensors
- Front frequency* - Frequency of the front sensors
- In-car entertainment fader - The volume of the current audio or video* source is reduced when the parking aid is switched on.
You will hear a short test tone each time you make a new setting.
Note
- You can also change the warning beep settings directly from the graphic display* or reversing camera* picture. Simply press the control button for Settings*.
- New settings are not activated until you switch on the parking aid again.
- The settings will be automatically stored and assigned to the remote control key.