- Fig. 1 Detail of the centre console: Selector lever with interlock button
Driving away from a standstill
Press and hold the brake pedal.
Press and hold the interlock button (the button in the selector lever handle), set the selector lever to the desired position (e.g. D/S) and release the interlock button.
Wait for the gearbox to engage the gear (a slight movement can be felt).
Release the brake and press the accelerator WARNING!.
Stopping briefly
Press the brake pedal to hold the Audi A5 when stationary (for instance at traffic lights).
Do not press the accelerator while waiting.
To prevent the Audi A5 from rolling away, apply the parking brake before moving off on steep gradients WARNING!.
As soon as you accelerate as normal, the parking brake will automatically be released and the Audi A5 will start moving.
Stopping/parking the car
If you open the driver's door while the selector lever is not in position P, the Audi A5 can roll away. The message Gearbox: selector lever in gear! will appear. A buzzer will also sound.
Press and hold the brake pedal WARNING!.
Apply the parking brake.
Move the selector lever to P.
Stopping on a slope
Driving away on a slope (Audi A5s without Audi hold assist*)
Apply the parking brake.
Once you have engaged a gear press the accelerator carefully. The parking brake will be released automatically if you are wearing your seat belt.
Driving away on a slope (Audi A5s with Audi hold assist*)
Once you have engaged a gear, release the footbrake and press the accelerator Link.
The engine can only be started when the selector lever is in P or N.
Driving down hills: In some situations (such as when driving on mountain roads) it can be advantageous to switch temporarily to the manual shift programme so that the gear ratios can be selected manually to suit the driving conditions WARNING!.
On a gradient the parking brake should be applied first and the selector lever should be moved to P Link. This reduces the load on the locking mechanism and makes it easier to move the selector lever out of position P.
multitronic gearbox: Your Audi A5 is equipped with the hill hold assist function which makes it easier to drive away on a slope. The system is activated when you press and hold the brake pedal for a few seconds. When you release the brake pedal the braking force will be maintained for a moment in order to prevent the Audi A5 rolling back when you drive away.
- The driver should never get out of the Audi A5 when the engine is running and a gear is engaged.
- Do not press the accelerator while selecting a gear with the Audi A5 stationary and the engine running, as this could cause an accident.
- Please note that some power will still be transmitted when you stop temporarily with the selector lever in position D/S or R. For this reason, to avoid risking an accident, press the brake pedal firmly when stopping to prevent the Audi A5 rolling away.
- Never move the selector lever to R or P when driving at normal speeds, as this could cause an accident.
- Before you drive down a steep gradient, reduce the speed and use "tiptronic" to select a low gear.
- Never allow the brake to drag and do not use the brake pedal too often or for long periods. Constant braking will cause the brakes to overheat and will considerably reduce the effectiveness of the brakes. It will increase the braking distance and could cause the brake system to fail.
- To avoid rolling back on gradients always hold the Audi A5 with the footbrake or parking brake if you stop.
- Never attempt to hold the Audi A5 with the clutch when stopping on a gradient. The clutch is disengaged automatically if it is overloaded and becomes too hot - accident risk! If the clutch is overloaded, the indicator lamp
will light up and a message will appear Link.
- When you have stopped on a gradient, do not try to stop the Audi A5 rolling back by accelerating when a gear is engaged. This could cause the gearbox to overheat and become damaged. Apply the parking brake or press the brake pedal in order to prevent the Audi A5 from rolling back.
- S tronic and tiptronic gearboxes: If you allow the car to roll with the selector lever in position N and the engine switched off, the gearbox will be damaged as it will not be lubricated.
Note
For safety reasons the parking brake will only release automatically if the driver's seat belt is engaged in its buckle.