|
|
Applies to: vehicles with emergency call function
Emergency calls can be made in two different ways.
- Fig. 214 Front headliner: Cover for emergency call button
Important: The LED -2- must be lit in green.
Manual emergency call
Important: The ignition must be switched on.
Lightly press the cover -1- to open it.
Press the emergency call button until the LED -2- flashes in green. The emergency call will be placed.
If you press the emergency call button accidentally, press it again immediately until the LED lights up permanently in green. The emergency call will be cancelled.
Automatic emergency call
In some circumstances, the vehicle s electronics will make an emergency call automatically if, for example, an airbag has been triggered. The LED in the emergency call button -2- will flash in green. The emergency call will be placed. This call cannot be cancelled.
The meaning of the LEDs is as follows:
- Green – The emergency call function is available.
- Red – A fault has occurred in the emergency call function. Please contact a qualified workshop. Emergency calls cannot be placed1).
- Off – The emergency call function is temporarily unavailable, e.g. if there is no network.
Note
If the emergency call is dropped due to a poor connection, the system will re-connect automatically.