|
- Fig. 1 Inserting an SD card
The SD card readers are located in the glove box.
- To insert an SD card: The missing corner of the SD card must face to the front right; the printed side should face up, and the contact surface should face down. Slide the SD card into the slot in the card reader -1- until you feel it engage Fig. 1.
- To remove an SD card: Briefly press the SD card to release it.
The SD card readers are started and operated via the MMI ►Link.
Caution!
Only use one-piece SD cards. If you use adapter cards (more than one piece), the SD card can become detached from the adapter (e.g. caused by jolting, etc). Parts could then get stuck in the drive, impairing the functionality of the system.
Note
Store the SD cards in a suitable case to protect them from dirt and dust and to avoid damage.