|
Applies to: vehicles with xenon headlights
- Fig. 349 Headlight: Plastic connector for turn signal
- Fig. 350 Bulb holder for turn signal bulb
Removing
Pull the plastic connector together with the bulb out of the headlight housing Fig. 349►.
Disconnect the plastic connector from the base of the bulb ►.
Installing
Push the new bulb into the plastic connector so that it is securely seated ►.
Insert the bulb into the headlight housing.
Fit the plastic connector into the housing and press it in until the side catches engage.
Put the cover back on.
Check whether the new bulb is working.