|
- Fig. 340 Right side of front bumper: Fitting the towline anchorage
The screw connection for the towline anchorage is located behind a cover cap on the right side of the front bumper.
Take the towline anchorage out of the vehicle s tool kit link►.
Press the cover cap briefly but firmly inwards -arrow-, detach it from the bumper and take it out Fig. 340►.
Screw the towline anchorage into the screw connection as far as it will go and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
WARNING
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!