|
Applies to: vehicles with Audi side assist
Should the side assist be deactivated automatically, a driver message will appear in the instrument cluster display.
Audi side assist: system fault!
The system cannot detect vehicles reliably and will be deactivated. The sensors are out of alignment or defective. Have the system checked by a qualified workshop soon.
Audi side assist: currently unavailable. No sensor vision Audi side assist: currently unavailable. Sensor view restricted due to surroundings. See owner s manual
The radar sensors are blocked. The area in front of the sensors must not be obstructed by bicycle racks, stickers, deposits or any other substances. If necessary, clean the area in front of the sensors Fig. ►.
Audi side assist: currently unavailable
The side assist is temporarily inoperative and cannot be switched on (for instance if the battery is not sufficiently charged).
Audi side assist: unavailable in towing mode Audi side assist: unavailable in towing mode
The side assist function will be switched off automatically after a short time when the electrical connector for the trailer socket is plugged in on vehicles with a factory-fitted towing bracket. If the towing bracket is not factory-fitted the side assist function may not be switched off automatically. The side assist must not be used when towing a trailer.
Rear parking aid: obstacle detection limited
The rear cross-traffic assist is not available. Either the ESC is switched off or the radar sensors may be obstructed by a bicycle rack, stickers, leaves, snow or similar objects. Switch on the ESC or, if necessary, clean the area in front of the sensors Fig. ►. If this message remains displayed, drive to a qualified workshop soon and have the fault rectified.