|
- Fig. 18 Remote control key (rear): Opening the cover
LED on remote control key
The LED on the remote control key lights up when you press the buttons.
The LED should flash once when you press one of the buttons briefly.
The LED should flash repeatedly when you press and hold one of the buttons (convenience open/close).
If the LED does not flash, the battery in the remote control key is flat. In addition, the indicator lamp 
will light up and the message Remote control key: please change key battery will appear. Replace the battery in the remote control key.
will light up and the message Remote control key: please change key battery will appear. Replace the battery in the remote control key.
Replacing the battery for the remote control key
Use a coin to lever the cover -2- off the key -1- Fig. 18►.
Insert the new battery with the “+” symbol facing up.
Press the cover back onto the key until it clicks into place.
For the sake of the environment
Used batteries must be disposed of appropriately and must not be discarded with ordinary household waste.
Note
The new battery must be of the same type as the original one in the remote control key.