|
- Fig. 1 Luggage compartment: Location of the retaining screw for the rear light (example on left side)
- Fig. 2 Releasing rear light from luggage compartment (example on left side)
Applies to Audi A3s: with halogen system (A3/A3 Sportback)
To change the bulbs, you must remove the rear light. Removing the light requires a certain degree of practical skill.
Check which of the bulbs is defective.
Open the boot lid.
Take the screwdriver out of the Audi A3 tool kit ►Link. Use the flat-blade side of the reversible insert.
Remove the cover from the side trim Fig. 1. On Audi A3s with side compartment, a coin is required in order to release the cover.
Insert the screwdriver into one of the horizontal holes on the head of the retaining screw in order to turn it Fig. 2.
Slacken the screw by turning it anti-clockwise (you may have to reapply the screwdriver several times).
Follow the remaining directions on ►Link.
Caution!
When removing or installing the rear light, take care not to cause any damage.
- Removing the rear light in particular can lead to the paintwork or rear light becoming damaged. This is another reason why we recommend having the bulbs changed by a qualified workshop.
Note
Follow the same procedure for installing/removing the rear light when replacing an LED rear light unit.