|
Press down the tab -1- and unplug the electrical connector -2- Fig. 1.
Turn the bulb holder anti-clockwise and take it out.
Fit the new bulb.
If necessary, use a cloth to remove any fingerprints from the glass part of the bulb.
Fit the bulb holder into the bulb housing and turn it clockwise to tighten. Plug in the electrical connector again.
Check whether the new bulb is working.
Re-install the fog light unit. The studs -2- Fig. 2 help to locate the unit in the correct position.
Tighten the screws -1- Fig. 2 and refit the trim panel.
Put the tools and jack back in the luggage compartment.
Note
To install the fog light, follow the instructions for removal in reverse order.