|
- Fig. 1 Front bumper (right side): Removing cover
- Fig. 2 Front bumper (right side): Towline anchorage screwed in
The screw connection for the towline anchorage is located behind a cover cap on the right side of the front bumper.
Take the towline anchorage out of the Audi A3's tool kit ►Link.
To detach the cover cap from the bumper press the top left part of the cap inwards Fig. 1.
Screw the towline anchorage into the screw connection as far as it will go Fig. 2 and tighten it with the box spanner.
Put the towline anchorage back in the tool kit after use.
WARNING!
If the towline anchorage is not screwed in as far as the stop, there is a risk of the screw connection shearing off during towing - risk of accident!