|
- Fig. 1 Centre console: START ENGINE STOP button
Applies to Audi A3s: with mechanical ignition lock
Switching off the engine
Stop the Audi A3.
Turn the ignition key to position -0-.
- Never switch off the engine until the Audi A3 is stationary. Otherwise you may not have the full benefit of the brake servo and power steering. You may need more strength to steer and brake the Audi A3 than you normally would. This would mean a greater risk of accidents and serious injury, because you cannot steer and brake in the normal manner.
- Never remove the key from the ignition while the Audi A3 is moving. The steering lock could engage suddenly, and you would not be able to steer the car.
- Always take the key with you when leaving the Audi A3 - even if you only intend to be gone for a short time. This is especially important if children are left in the car. They might otherwise be able to start the engine or use power-operated equipment such as the electric windows - this could lead to injuries.
Caution!
If the engine has been working hard for a long time, there is a risk of heat building up in the engine compartment after the engine has been switched off; this could cause engine damage. For this reason, you should leave the engine idling for about 2 minutes before switching it off.
Note
- After the engine is stopped the radiator fan may run on for up to 10 minutes, even if the ignition is switched off. The fan may also start running again after some time if the coolant temperature rises due to a build-up of heat, or if the engine is hot and the engine compartment is heated up further by direct sunlight.
All images, logos and text are property of © Audi. This site has no relationship with the company Volkswagen - Audi Spain nor any of its affiliates worldwide. For more information. To contact the author of this website click here.