The settings for the graphic display and acoustic signals are controlled via the MMI*.
Select: MENU button > control button Systems / Car systems > Driver assist > Parking aid.
Display
on* - The graphic display (parking system plus) or the reversing camera image (parking system plus with reversing camera*) will be displayed when the parking aid is activated.
off - The parking aid gives only acoustic warning signals when it is activated.
Warning beeps
Front volume - Volume for the front and side* zones
Rear volume - Volume for the rear zone
Front frequency - Pitch of the beeps for the front and side* zones
Rear frequency - Pitch of the beeps for the rear zone
In-car entertainment fader - The volume of the current audio or video source is reduced when the parking aid is switched on.
You will hear a short test tone each time you make a new setting.
Note
- You can also change the warning beep settings directly from the graphic display or reversing camera* picture. Simply press the control button for Settings.
- The settings will be automatically stored and assigned to the remote control key in use.