|
- Fig. 1 Display zones
Applies to vehicles: with parking system plus/park assist with 360° display
The parking system plus provides acoustic and visual assistance when parking.
Sensors are located in the front and rear bumpers. When the sensors detect an obstacle, you are alerted by acoustic signals (beeps) and a graphic display.
Please ensure that the sensors are kept free of stickers, deposits and any other substances which could impair the function of the system. Notes on cleaning
►Link.
Approximate range for each display zone:
-A- |
1.20 m |
-B- |
0.90 m |
-C- |
1.60 m |
-D- |
0.90 m |
-E-* |
0.90 m1) |
The acoustic signals sound with increasing frequency as you approach the obstacle. A warning tone will sound continuously when the vehicle is less than approx. 0.30 m away from the obstacle (or less than approx. 0.20 m away in zone -E-*). Stop moving immediately WARNING!, Caution!!
The volume of the warning beeps will be gradually reduced after about four seconds if the vehicle remains at a constant distance from a detected obstacle (it will not be reduced if the obstacle is closer than 0.30 m).
Note
Zone -E-* is detected and analysed as the vehicle is moving past. When you switch on the ignition or after the vehicle has been stationary for a while or a door is opened, the ambient surroundings may have changed. Zone -E-* is displayed in black on the MMI display for this reason.
1) Applies to vehicles with park assist with 360° display