|
Applies to vehicles: with lap timer (Audi S3/Audi S3 Sportback)
Calling up the lap timer
Recording lap times
To start recording a lap time, press the top part of the rocker switch -B-. The lap time is displayed in line -3- Fig. 2.
To finish measuring the current lap time, press the top part of the rocker switch -B- again. The next lap time starts running immediately. The previous lap time moves to the top of the display -1-. The current lap is shown in line -3-.
The 
symbol will stay green if the current lap time is the best time so far. The 
symbol will turn red if the lap time is not as good -2-.
symbol will stay green if the current lap time is the best time so far. The
symbol will turn red if the lap time is not as good -2-.
Displaying split times and interrupting the lap timer for a break
Press the bottom part of the rocker switch -B- to display a split time 
. The split time appears in line -3- for approximately 10 seconds. The current lap time continues running in the meantime.
. The split time appears in line -3- for approximately 10 seconds. The current lap time continues running in the meantime. To interrupt the lap timer, e.g. to take a break (pause 
), press and hold the bottom part of the rocker switch -B-.
), press and hold the bottom part of the rocker switch -B-. To resume recording of the lap time, press the top part of the rocker switch -B-.
If you interrupt the lap timer to take a break, you can resume recording later on, even if you switched off the ignition in the meantime.
Legend for centre display Fig. 2:
| -1- |
Last recorded lap time |
| -2- |
Symbols:
- 
: Start time -
: Worst lap time -
: Best lap time -
: Split time -
: Pause |
| -3- |
Current lap time |
| -4- |
Menu:
- Lap 1 (start lap) - New lap (start another lap) - Split time (lap sector time) - Pause (interrupt lap timer) - Reset (zero all lap times) |