- Fig. 1 Rear light: Position of reversing light
Applies to vehicles: with LED rear lights
If your vehicle has lights with LEDs, the only bulbs you can change yourself are the reversing light bulbs Fig. 1.
Turn the bulb holder and take it out together with the bulb.
Lightly press the defective bulb into the bulb carrier, then turn it anti-clockwise and remove it.
Fit the new bulb, pressing it into the bulb holder and turn it clockwise as far as it will go.
Use a cloth to remove any fingerprints from the glass part of the bulb.
Insert the bulb holder again and turn it until it is securely seated.