The settings for the graphic display*
and acoustic signals are controlled via the infotainment system*
.
Select: Function selector button CAR > control button Systems / Car systems*
> Driver assist > Parking aid.
Display*
- on - The graphic display appears on vehicles with parking system plus.
- off - The parking aid gives only acoustic warning signals when it is activated.
Warning beeps
- Rear volume - Volume for the rear zone
- Rear frequency - Pitch of the beeps for the rear zone
- Front volume* - Volume for the front zone
- Front frequency* - Pitch of the beeps for the front zone
- In-car entertainment fader - The volume of the current audio source is reduced when the parking aid is switched on.
You will hear a short test tone each time you make a new setting.
Note
- You can also change the warning beep settings directly from the graphic display. Simply press the control button for Settings.
- New settings are not activated until you switch on the parking aid again.
- The settings will be automatically stored and assigned to the remote control key.