- Fig. 1 Instrument cluster: Time (vehicles without driver information system)
- Fig. 2 Instrument cluster: Time and date (vehicles with driver information system)
- Fig. 3 Instrument cluster: SET button
Depending on the equipment fitted, you can select a quartz clock, a radio-controlled clock*
or a GPS-controlled clock*
. You can set the time using the SET button Link. On vehicles with driver information system, you can also set the time via the infotainment*
system. Please refer to the infotainment Operating Manual for more details.
Note
- The time, date, recorded mileage and outside temperature will be displayed for about 30 seconds after you switch off the ignition or open the driver's door.
- When the ignition is switched off, the clock and date display can be switched on for about 30 seconds by pressing the SET button Fig. 3.