-
- Fig. 1 Google Earth map display
-
- Fig. 2 Google Earth map display with Google Street View
-
- Fig. 3 Google Earth map display
Applies to vehicles: with navigation system and Audi connect
You can have the map display satellite images using the Google Earth
map display.
Important: The requirements for Audi connect services must be met
Link.
Select: NAV button > control button
Settings > Map
display > Google Earth.
For this map display the system uses data packets received online
in the form of satellite pictures and combines these pictures with
the road network from the Standard
map display. The MMI hard drive has a memory capacity of 2 GB for
temporarily storing the map/navigation data received online (corresponds
to map/navigation data for about 4000 km of route guidance). You
can also use the loaded satellite pictures for route guidance without
an active data connection as long as these pictures are stored on
the hard drive.
Google Street View
With Google Street View, you can explore many locations all
over the world virtually from the perspective of a pedestrian.
Google Street View is available as soon as the symbol -1-
Fig. 1
is shown in the legend.
To start Google Street View, turn the rotary pushbutton to select
a scale below 30 m.
The following functions are available:
- To explore a destination step-by-step: Press the rotary pushbutton when the symbol -2- Fig. 2 is visible.
- To zoom in/out of the current display (up to 4x): Turn the rotary pushbutton to the left/right -3-.
- To pan the view to the left/right or move it up/down: Move the rotary pushbutton in the desired direction.
Note
- Please observe the notes in the chapter Notes on Audi connect Link.
- You can delete the data stored by the Google Earth map display using the Factory settings function Link.
- Google Earth is an Audi connect service that is updated at regular intervals when it is called up. This can take a few seconds.
- When the Google Earth map display is switched on and the position 3D map type is selected, the MMI display automatically switches to the position 2D map while you are driving through a tunnel.
- For safety reasons, the Google Street View functions cannot be used while the vehicle is moving.