- Fig. 1 Position of the bulbs on the bulb carrier. Example: Left rear light
Applies to Audi A1s: with LED rear lights
The following instructions for changing the bulb apply to lights with LEDs.
The table below gives an overview of the bulb positions.
Turn the bulb holder and take it out together with the bulb.
Lightly press the defective bulb into the bulb carrier, then turn it anti-clockwise and remove it.
Fit the new bulb, pressing it into the bulb holder and turn it clockwise as far as it will go.
Use a cloth to remove any fingerprints from the glass part of the bulb.
Insert the bulb holder again and turn it until it is securely seated.
Position of bulbs
| Pos. Fig. 1 |
Bulb function |
| A |
Turn signal |
| B |
Reversing light |