To change the bulbs, you must remove the headlight. Removing the light requires a certain degree of practical skill.
The following instructions for changing the bulb refer to the left headlight unit. Follow the same procedure for changing the bulb on the right side.
Switch off the ignition and the lights.
Please refer to WARNING!.
Open the bonnet.
Unplug the two electrical connectors Fig. 1. To do this, press in the electrical connector -1-, then press the release point -2- and pull out the connector -3-.
Take the screwdriver handle and the interchangeable Torx bit out of the Audi A1 tool kit Link.
Slacken the bolts (about 6 turns) Fig. 2. Use the small Torx bit for bolts -A- and -C- and the large Torx bit for bolt -B-.
Carefully pull out the headlight.