- Fig. 1 Rear seat: Adjusting and removing/installing head restraint
Before carrying passengers on the rear seats, pull the head restraints on the occupied seats up at least one notch.
Adjusting head restraints
To raise the head restraint, take hold of it on both sides and move it all the way up until you feel it click into place.
To lower the head restraint, press button -A- Fig. 1 and slide the head restraint downwards.
Removing head restraints
The backrest has to be tipped forwards slightly in order to remove the head restraint.
Push the head restraint down as far as it will go.
Release the backrest Link.
Push the head restraint upwards as far as it will go.
Press button -A- and at the same time pull the head restraint out of the backrest WARNING!.
Push the backrest up until it engages securely WARNING!.
Installing head restraints
The backrest has to be tipped forwards slightly in order to install the head restraint.
Release the backrest Link.
Push the posts of the head restraint into the guides until you feel them click into place. It should no longer be possible to pull the head restraint out of the backrest.
Press button -A- and push the head restraint downwards.
Push the backrest up until it engages securely WARNING!.
Remove the rear head restraints only if this is necessary in order to attach a child seat Link. Install the head restraint again immediately after removing the child seat. Travelling with the head restraints removed or incorrectly adjusted increases the risk of severe injuries.