- Fig. 1 Mobile phone bonded to on-board phone system
Important: Available mobile phones must be shown on the MMI display Link, and the Audi A1 must be stationary.
Turn the rotary pushbutton to select a mobile phone and press the rotary pushbutton.
To bond the mobile phone, turn the rotary pushbutton to Handsfree and press the rotary pushbutton. A 4-digit PIN code will appear on the MMI display.
To enter the 4-digit PIN code shown in the display, select Yes. Enter this PIN code on the mobile phone. You will be given about 30 seconds to complete the entry, or
To enter any 4 to 16-digit PIN, select No. Enter any 4 to 16-digit PIN code via the speller Link. Then also enter this PIN code on the mobile phone. You will be given about 30 seconds to complete the entry.
Confirm the bonding process on the mobile phone when prompted to do so. The Bluetooth symbol -1- Fig. 1 will appear in the status line of the MMI display when the mobile phone has been bonded successfully.
After the mobile phone has been bonded, the contacts are automatically loaded into the directory of the MMI. It may take several minutes to load the entries, depending on how many contacts are stored on the mobile phone. For more information about the directory, please refer to Link.
Note
- You have to enter the PIN code once only. Any Bluetooth devices that have already been bonded to the MMI system once are connected automatically when they are within range. Please pay attention to any connection queries on your mobile phone.
- You can speed up the automatic connection by authorising the on-board phone system on your mobile phone. For more information on how to bond your mobile phone, please refer to the mobile phone operating instructions.
- For up-to-date information on the phone pre-installation, please see the Internet (e.g. www.audi.com/bluetooth) or contact an Audi dealer.